Hey readers, update on the carbon bits. I've finally put them in after a few minor difficulties to get the bits to sit just flush.
 |
| Packages arrived! |
The rear boot ended up being a CF4 SiR-T Accord which required me to change the garnish lights and optionally, the tail lights (which you'd do so to match the garnish lights duh).
I ended up finding a Accorneo (Accord/Torneo Club Group from NZHondas) member who has the set of lights so I snapped them up and all fixed!
Next problem was the bonnet not sitting flush. It was literally sitting approximately 10mm higher than the right guard!
 |
| Boo. |
After some research, found that aftermarket bonnets will need to be adjusted and is done so in two ways:
-Adjusting the hood latch
-Adjusting the bonnet hinges
For a guide on those, refer to the modifications section.
After some adjusting, here are the results:
As for other updates, I'm currently polishing up the Kakimoto exhuast and Top Fuel Intake. Will get pictures of the progress up in the next few days. Laters!
